Kids Embrace Batman, Instructions Manual

Page: 6 / 18

4
Parts list
Underside of walker
Lay out the parts on a soft level surface and compare them to
the parts list below. Do not discard any packaging until you are
sure that you have all the parts.
Keep children clear during assembly as the pack may contain small parts
which could present a choking hazard. All plastic packaging should be
disposed of or destroyed to keep them away from children.
IMPORTANT: Please note each of the fixing points (M - O) for the
anti-fall blocks (parts E) consist of three different sized holes. This
means that the anti-fall blocks will only fit one way. If you cannot
push the anti-fall blocks into the fixing points check that they are the
correct way round and try again.
M Fixing points for the front anti-fall blocks (parts F).
N-O Fixing points for the side anti-fall blocks (parts F).
P Mounting points for the front wheels (parts E).
Q Mounting points for the back wheels (parts D).
R Height adjustment block
1
2
No Part Qty
A Walker body 1
B Seat fabric 1
C Seat support 1
D Back wheels 2
E Front wheels 2
F Anti-fall blocks 6
G Toy wheels (back) 2
H Toy wheels (front) 2
I
Left-hand mirror 1
J Right-hand mirror 1
K Rear spoiler* 1
L Play tray* 1
Note: You will require one Phillips screwdriver (not supplied).
*Actual style may vary