background image

 

8

WARNING! 

You must assemble this product as instructed. Do not allow children to play on equipment that has not 

been properly assembled. Serious or fatal injury could result. 

If you have any questions about the assembly of your purchase, contact  

"Kids and Fitness Inc."  at +1(201)477.05.02

 

6.1 

Preparation to the installation, tools and equipment. 

 

Read these instructions in their entirety before you begin. This will help ensure an easy and safe installation. 
6.1.1  Unpack the PLAYGROUND SET. To avoid danger of suffocation, remove the plastic covers from all components 
before using them. This cover should then be destroyed or kept away from children. 
6.1.2  Put components on preliminary prepared place (a table, a place on floor).  
6.1.3  Inventory your package. Make sure that package contents match the base configuration of your PLAYGROUND 
SET. 
6.1.4  During assembly you will need the following tools, specified in the Table 4: 

Table 4

 

Description Quantity, 

pcs. 

Allen key S=13mm  

1 (included into set  DSK) 

Hexagon socket wrench S6

мм

 

1 (included into set  DSK) 

Face wrench S=24mm  

 

Plumb line

 

(or thin rope with attached load)  

Does not included into 

PLAYGROUND SET 

Step-ladder with height 5’ 

 

6.2 

Safety precautions.  

6.2.1  Assembling, disassembling and installation of the PLAYGROUND SET must be done by not less than 2 adults  
6.2.2 Attendance 

and 

participation of children in assembling, disassembling and installation of the PLAYGROUND SET 

is not allowed. 

6.2.3  Assembly of the PLAYGROUND SET must be conducted in strict succession to the instructions, given in OM.  

6.3 

Succession of assembling and installation of the PLAYGROUND

 

SET. 

6.3.1

 

Assemble stanchions (picture 2).

 

  

 

Screw all nuts (item 51, table 2) on 
all bolts (item 42) till the end of 
thread. Set bolts assembled with the 
nuts into lower stanchions (item 6, 
table 2) (with threaded insets in butt). 
Screw bolts till the end. 
Assemble stanchions (items 7 and 6, 
table 2) without clearance between 
mating parts. 

 

15

15

10

9

14

10

15

15

10

9

14

10

Mounting of details (items 24 and 58, 
table 2) is done during installation of 
PLAYGROUND SET. 
 

0.

2 in

max

Summary of Contents for DSK -3-8.00














Reviews: