KidKraft F29355 Installation And Operating Instructions Manual Download Page 20

Page: 20 / 76

Step 1: Inventory Parts - Read This Before Starting Assembly

Quantity

Key Number

Part Size

2X 10157 2 x 4 x 83” (50mm x 100mm x 2108mm)

Inventory Parts - Read This Before Starting Assembly

This is the time for you to inventory all your hardware, wood and accessories, referencing

the parts identification sheets. This will assist you with your assembly.

• The wood pieces will have the key number stamped on the ends of the boards. Organize

the wood pieces by step, as per the key numbering system below.

Read the assembly manual completely, paying special attention to ANSI warnings;

notes; and safety/maintenance information on pages 1 - 8.

If there are missing or damaged pieces,

please contact the KidKraft Consumer Engagement team

before going back to the retailer.

Outdoor Swingsets and Playhouse Parts Ordering

h�ps://parts.kidkra�.com/partsorderemail

You can order replacement parts for this product 24 hours a day / 7 days a week:

If you have assembly or product questions, please refer to the front cover

for direct contact information for our Consumer Engagement team OR you

can also use this QR code with your smartphone for common questions

and contact information.

KidKra� Help Center

h�ps://kidkra�.zendesk.com/hc/en-us/

Order Replacement Parts 24/7

STOP STOP STOP STOP

Inventory should be completed before starting installation. KidKraft will not cover costs of any

additional installation trip due to missing or damaged pieces.

Summary of Contents for F29355













































































Search results

Summary of Contents for F29355

Reviews:

KidKraft F29355, Installation And Operating Instructions Manual, Page: 20 / 76

Search results

Summary of Contents for F29355

Reviews: