KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual Download Page 1 | Manualshive

Page: 1 / 72

KidKraft Cedar Summit Timber Trail Playhouse Installation And Operating Instructions Manual Download Page 1

INSTALLATION AND OPERATING INSTRUCTIONS

TIMBER TRAIL PLAYHOUSE FSC - P280099

Rev 07/25/2019

Table of Contents

Warnings and Safe Play Instructions    .  .  .  .  .  .  .  .pg . 2
Instructions for Proper Maintenance   .  .  .  .  .  .  .  .pg . 2
Keys to Assembly Success   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .pg . 3
About Our Wood – Limited Warranty  .  .  .  .  .  .  .  .pg . 4
Battery Instruction and Warranty   .  .  .  .  .  .  .  .  .  .  .pg . 5
Keys to Quick Assembly  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .pg . 6
Part ID    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .pg . 7
Step-By-Step Instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 15
Installation of ID/Warning Plaque  .  .  .  .  .  .  .  .  . pg . 69

To reduce the risk of serious injury or death, you must read and follow these instructions.

Keep and refer to these instructions often and give them to any future owner of this play set.

Manufacturer contact information provided below.

OBSTACLE FREE SAFETY ZONE - 19’ 9” x 17’ 9” (6.02 x 5.41m)

CAPACITY - 4 Users Maximum, Ages 2 to 10. Weight Limit 110 lbs. (49.9 kg) per bench.

RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

WARNING. Only for domestic use.

WARNING

2-4 Hrs

10 - 12 Hrs

FOR FORT & SWING

TWO PERSON

ASSEMBLY

10 - 12 Hrs

FOR FORT & SWING

1.5 - 2 Hrs

FOR OUTDOOR FAMILY
DOMESTIC USE ONLY

Cedar Summit by KidKraft

4630 Olin Road

Dallas, TX 75244, United States
customersupport@kidkraft

Online Parts Replacement:

Cedarsummitplay .com/parts-center-warranty-claim

Customer Service:

1(800) 933-0771 or (972) 385-0100
KidKraft Netherlands BV

Olympisch Stadion 29

1076DE Amsterdam, The Netherlands
Europe Customer Service: +31 (0)20 305 8620

europecustomerservice@kidkraft .com

EU Online Parts Replacement: parts .kidkraft .eu

9400099

5.41m

17’ 9”

1.41m 4’ 7.6”

2.02m

6’ 7.5”

6.02m

19’ 9”

1
2
3
...
»

Summary of Contents for Cedar Summit Timber Trail Playhouse









































































Reviews:

No comments