WARNING:
CHOKING HAZARD. Unassembled parts
may be choking hazard to children 3 years
and younger.
WARNING:
Do not install on a wall where items can
fall off and injure a child.
WARNING:
ADULT ASSEMBLY REQUIRED.
Product includes small parts with potentially
hazardous sharp points and sharp edges in
the unassembled state. Keep unassembled
parts away from children.
E. Nylon Nut x 1
F. Small Washer x 2
Wrench x 1
A. Screw x 1
B. Wood Screw x 1
C. Plastic Anchor x 1
D. Plastic Strip x 1
G. Large Washer x 1
Do not drill an oversized hole
or the wall anchor will not hold
tightly into the wall.
***For safe installation it is essential to use hardware appropriate for your wall type. This wall anchor is
only for Drywall surfaces where wood studs are not available. Mount to wood wall studs whenever
possible.
Use a 1/8” (3mm) drill bit for the pilot hole. If mounting to plaster, wood panels, brick or other surfaces
than drywall consult your local hardware store or a qualified professional.
The following tools (not included) are
required for assembly:
Electric
Drill
1/8” (3mm) Drill Bit
Attach plastic strip
to back of product.*
Hole predrilled
in product
Step 1
Step 2
Wall Anchor
Assembly Instructions
Hardware
Phillips
®
Screwdriver
*Product may vary
1/8” (3mm)
Hole in wall
Use 1/8” (3mm) drill
bit to drill hole in wall.
Tap wall anchor into hole.
Secure product to wall with
screw “B” through plastic strap
and into wall anchor.
C
F
G
A
F
D
E
© 2011 KidKraft, LP
