OPERATION
Controller Batteries
CAR ALIGNMENT
POWER
Battery Charging
Power
Switch
Power
Indicator Light
Forward
Reverse
Power On/Off
Left
Right
Car
Power
Switch
Controller
Power
Switch
Engine
Start
Button
Engine
Start and
Siren Button
Alignment
Lever
To power on, locate the on/off switch on the front controller and switch that to the on
position. Next locate the on/off switch on the bottom of car and switch that to the on
position. Press the right top button on the controller to start engine.
Note: Always turn the controller on first.
Press the engine start and the engine sound will begin. Press up on the remote toggle
to move the car FORWARD. Press down remote to move the car BACKWARD.
Push remote toggle right to TURN RIGHT while moving. Push remote toggle left to
TURN LEFT while moving.
To keep the car driving straight locate the
alignment level on the bottom of the car.
Move the lever in the direction the car
needs to go in order to drive straight.
Make small adjustments.
Battery Cover
Screw
4 AA
Batteries
On
On
Remove the battery cover screw located on the back of controller and press the
battery door release tab. Open the cover and insert (2) AA batteries as shown. Close
the cover and re-tighten the battery cover screw. Note: The battery terminals must be
positioned as shown.
Note: Carefully remove all content from the packaging.
Make sure the power switch on the car is set to the OFF position.
Locate the battery compartment on the bottom of the car, and loosen the screw on
the battery cover and press release tab on cover.
Insert 4 AA batteries correctly by matching the + and – polarity markings as
indicated.
Replace the battery compartment cover and tighten screw.
Battery
Cover
Release
Tab
Battery Cover
Screw
Battery
Cover
Release
Tab
2 AA
Batteries
