KIDDY SMILEFIX PRO, Manual

Page: 30 / 112

When the baby car seat is correctly locked in position on the platform, an
audible signal will be emitted (Fig. 22).
The correct locked-in position can also be checked at the position of the
emergency release buttons.
When the baby car seat is locked into the correct position, the green
surfaces will be visible and the buttons are at the top (Fig. 23).
Now slide the baby car seat together with the carriage securely and tightly
against the backrest of the car seat (Fig. 24).
The carry handle must always be in this position when the seat is used on
the kiddyfix (Fig. 24).
6.3 Removing the kiddy smilefix pro from the kiddyfix
To be able to remove the baby car seat, push the shell lightly downwards at
the head end and keep the release switch/button (F) on the carry handle (G)
pressed in (Fig. 25, No. 1).
The kiddy seat can now be removed in an upwards movement (Fig. 25, No.
2).
As alternative procedure the baby car seat can be released from the platform
by simultaneously pressing down the emergency release buttons (Fig. 26)
and pulling the carry handle (G).
7. Removing the covers
The baby car seat may not be used without its cover. The covers are a
fundamental component of the safety concept! Therefore, use only original
covers from the manufacturer! If you require replacement covers, you can
order them from the manufacturer.
If you want to remove the cover, it is not necessary to dismantle the belt
system of the kiddy smilefix pro!
11
ENG