KIDDY PHOENIXFIX3, Directions For Use Manual, Page: 35 / 121

29
EN
Before driving, ensure that the lap and shoulder belts are correctly positioned
on the impact shield (L), are seated tightly, and are not twisted. The belts must
lie flat over the belt guide area of the impact shield (Fig. 23+24). Check the belt
run regularly.
8 Removal of the k-fix+ after semi-universal use
Actuate the unlocking handle (K) (Fig. 25, No. 1) while simultaneously pulling the
seat (E) away from the vehicle back rest (Fig. 25, No. 2).
Open the left and right k-fix
+
connectors (D) by sliding the unlocking mecha-
nisms (S) forward (over the 'green' locking display (R)) (Fig. 26).
The kiddy phoenixfix 3 is uncoupled from the vehicle structure when both
connectors (D) are open.
Finally, the k-fix
+
connectors (D) must be retracted into the seat.
To do so, rotate the connectors (D) towards the seat (Fig. 27). For this purpose,
actuate the unlocking handle (K) (Fig. 28, No. 1) and push the connectors (D)
completely into the seat (E) (Fig. 28, No. 2). The connectors must be correctly
retracted into their respective recesses in the seat.
Now release the unlocking handle (K).
9 Removing and applying the cover
Never use your Kiddy child restraint system without the original
cover. The cover is part of the safety concept.
9.1 Removing the back rest cover
First put the headrest (F) into the highest position.
!