KIDDY PHOENIX PRO, Directions For Use Manual

Page: 26 / 97

8
The kiddy phoenix pro’s backrest (C) is then automatically lowered into the
reclined position. The reclined position is reached when the headrest (B) of
the child seat rests against the backrest of the vehicle (Fig. 12).
Do not attempt to adjust the reclined position during travel. Always
bring your vehicle to a complete stop to do this. Unfasten the vehicle
restraint, change the position of the sleeping clamp (D) and the
backrest (C), and then secure your child (the child restraint system)
again.
To secure your child in the reclined position, proceed as described in Section
5.2.
5. In-vehicle installation
5.1 Seat selection and adjustment
Please familiarise yourself thoroughly with the use of child
restraint systems (A) as described in your vehicle’s owner’s
manual.
The child restraint system (A) kiddy phoenix pro can be installed in vehicles
on any seat with a three-point restraint system (lap and shoulder restraint)
(Fig. 13).
The kiddy phoenix pro can also be used in rear-facing car seats that are
equipped with a three-point restraint system (Fig. 13).
If the motor-car manufacturer allows child restraint systems on
the passenger seat, the seat should be moved to the position
furthest back.
*
ENG