7
ENG
3.2 Sunroof
The sunroof can be adjusted to protect the kiddy nest against direct rays
from the sun above the holder (holder in carrying position).
You can assemble and disassemble the sunroof in the following manner:
1.) Slide the sunroof’s frame through the loop in the fabric. The rounded end
of the holder must face the fabric.
2.) Press the fastening pins at the end of the sunroof’s frame into the holes
intended for them on the kiddy nest. These are located close to the rota-
tion point of the holder on the side of the kiddy nest.
3.) When removing the sunroof, tilt the holder towards the child’s feet and
push the fastening pins at the end of the frame out of the (fastening) ho-
les.
Loosen the cover on the kiddy nest to make it easier to find the
fastening holes on the sides.
loop
frame
rounded end
foot piece
fastening pin
fastening hole