ENG
13
6.3 Pulling off the head rest cover
Loosen both fastening clips on the reverse of the head rest cover and turn
these to the front. Loosen the cover around the yellow height adjustment
handle on the reverse of the head rest. Pull the head rest cover from the
back and forwards over the head rest.
6.4 Impact shield cover / toy figures
The impact shield cover must not be pulled off. If the impact shield or its
cover becomes damaged, please contact your dealer or the manufacturer
directly.
The toy figures can be removed by loosening the press studs on the faste-
ning cord.
6.5 Putting the cover back on
When putting the cover back on, follow the instructions in the reverse order
of removing the cover (see 6.1. – 6.3).
7. Care instructions
7.1 Cleaning the cover
The covers are an essential component of the safety concept. Only use ori-
ginal covers from the manufacturer. If you need replacement covers, these
can be ordered from your dealer. The cover and the removable fastening
cord of the toy figures (6.4) are washable at 30 degrees in a mild wash cycle.
Spin-dry or tumble-dry are not recommended.
Summary of Contents for INFINITY PRO -
Page 2: ......
