KIDDY Evolution Pro 2, Instruction Manual

Page: 23 / 158

17
EN
3. This infant carrier is not intended for longer peri-
ods of sleeping.
4. It is dangerous to use this reclined infant carrier
on an elevated surface, e.g. a table.
5. Always use the restraint system.
6. Do not use the infant carrier if any components
are broken or missing.
7. Do not use accessories or replacement parts oth-
er than those approved by the manufacturer.
8. This child seat does not replace a cot or a bed.
Should your child need to sleep, then it should be
placed in a suitable cot or bed.
10. Remove / Replacing the covers
10.1 Removing the sunshade
Detach the outside loops on both sides of the car seat (fig. 24, no. 1).
Press the attachment clips together (fig. 24, no. 2) and remove the
sunshade by pulling upwards. (fig. 24, no. 3). Remove the fabric can-
opy from the gap between and around the headrest of the car seat.
To remove the fabric from the sunshade frame detach the loops from
each attachment clips (fig. 24, no. 4). Hold the sunshade frame and
turn one of the attachment clips (fig. 24, no. 5) and pull it off the frame
downwards. Then pull the fabric off the frame.