3
2. Assembly instructions
Tools required: Allen wrench (provided). Flat head screw driver.
Note: It is recommended that assembly and dismantling is carried out by two persons, one person to
hold the parts in position the other to screw in the fixings.
WARNING. Keep young children away from the area you are using to assemble or
dismantle the Classic Toddler Bed Some of the parts are heavy and could
fall on the child. Some of the fixings are a choking hazard to young
children.
WARNING
Incorrect assembly or failure these instructions could result in serious injury
or death.
ATTACHING THE MATTRESS BASE TO THE ENDS OF THE BED
Attach the mattress base (3), to the Head end (1) using the Fixing bolts (C) and the Barrel nuts (B).
IMPORTANT: The head end of the bed has four small fixing holes, two on either side and the
mattress base has two fixing holes in the outside of the mattress rail, (one on either side) the holes are
positioned near one end of the mattress base – MAKE SURE you attach the head end to the end of
the mattress base closest to the fixing holes (the holes are used to attch the bed guard).
Using a screwdriver align the threaded hole of the barrel nut in the corner of the mattress base and
insert the fixing bolt, through the mattress base support hole in the end and into the drilled holes in
the ends of the mattress base as shown.
Use the Allen wrench (A) to screw the fixing bolts into the barrel nuts – DO NOT TIGHTEN.
Follow these steps for each corner of the mattress base – NOW TIGHTEN ALL OF THE BOLTS.
ATTACHING THE BED GUARDS TO THE BED
Take one of the bed guards (4) and line up the three holes on the bed guard with the three holes on the
bed. Using the Allen wrench and three of the bed guard fixing screws (D) screw the bed guard to the
bed. Attach the second bed guard to the other side of the bed..
DISASSEMBLING THE BED
Using the Allan wrench loosen and remove the Bed guard fixing screws (D). . Using the Allan
wrench unscrew each of the base fixings. Store all parts safely, out of reach of children.
C
B
A
1
3
Attaching the mattress base