There are two ways to have musical fun with your Sing-Along MP3 Princess Microphone.
You can sing along to the built-in song, or to any song on your MP3 player or other audio
device by connecting it via the MP3 cable (see instructions below). Have a great show!
Song Mode
• Slide the
Mode Switch
located on the side of the microphone to Song position
<sh
to enable song mode.
• Press the
Jewel Button
. The microphone will automatically start playing the built-in
song and lights will pulse to the beat.
Press
the
Jewel Button
again to interrupt the song.
• Slide the
Mode Switch
to Off to turn the microphone off.
MP3 Mode
• Slide the
Mode Switch
to MP3 position
<s
to enable MP3 mode.
• Slide the MP3 compartment cover and remove cover.
• Connect included MP3 Audio Cable to the headphone or line out jack
on your MP3 player or other audio device.
• Fit the MP3 Audio Cable into the cable slot on the bottom of the
microphone and slide the MP3 compartment door closed.
• Turn on and play your MP3 player/audio device
• Press the
Jewel Button
to hear the music on your MP3 player/audio device. Adjust the volume on your audio device. Press the
Jewel Button
again to stop listening.
• Slide the
Mode Switch
to OFF to turn off the mic when you are done. Remember to turn off your MP3 player or other audio
device, too.
There is a 5 minute timer that will automatically turn off MP3 playback. Press the
Jewel Button
again to resume MP3 playback.
Important Message to Consumers
Thank you for purchasing one of the Disney/Princess’s many top-quality electronic products. We would appreciate it if you take a few
moments to read through these instructions. This will help you explain the safe and proper way to use this toy, and to help give it the
long-lasting life that Disney/Princess products are designed for.
Keep these instructions for future reference as they contain important information
Playing with the Sing-Along MP3 Princess Microphone
MODEL: DP-070 (REV 1)
INSTRUCTION MANUAL (FRONT)
DATE : MAY 25, 2011
SIZE: 180 L x 230 H mm
COLOR : PRINT PURPLE (PMS 265C)
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide resonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
MODEL DP-070
Sing-Along
MP3 Princess
Microphone
MP3 Audio Cable
Remove Compartment
Cover To Access MP3
Audio Cable
Front of Microphone
Pulsing
Lights
Press Jewel
Button to Play
Microphone
Mode Switch
Song/Off/MP3
MODEL: DP-070 (REV 1)
INSTRUCTION MANUAL (BACK)
DATE : MAY 25, 2011
SIZE: 180 L x 230 H mm
COLOR : PRINT PURPLE (PMS 265C)
ATTENTION:
Batteries should only be installed by an adult.
The unit comes with batteries already installed. These batteries
are meant for in-store demonstration use only, and should be
replaced with fresh batteries. To replace the batteries at home:
���
Use a Philips screwdriver to open the battery compartment
door.
���
Install 2 "AAA" R03 (UM-4) size batteries into the compartment,
making sure that the + and - polarities match the diagram
printed inside.
���
Close the battery
compartment door and
tighten the battery door
screw. Don’t over tighten.
For the Best Possible
Performance
• We recommend the use of
alkaline batteries for longer
life.
• Different types of batteries or new and used batteries are not
to be mixed.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries from the unit.
• Do not attempt to recharge non-rechargeable batteries.
• Remove rechargeable batteries from the unit before charging.
• The supply terminals are not to be short-circuited.
• Batteries should be removed if the item is not going
to
be needed for an extended period of time (approximately
30 days or more) to prevent leakage or damage to the unit.
• Rechargeable batteries are only to be recharged under adult
supervision.
Installing the Batteries
Questions or Comments
For questions or comments regarding this or other
KIDdesigns products, please call our toll-free number:
1-888-TOP-TOYS.
Please also visit our website: www.kiddesigns.com
KIDdesigns warrants this product to be free from defects in
workmanship and materials, under normal use and conditions,
for a period of one year from the date of original purchase.
Should service be required by reason of any defect or malfunction,
it is best to first return this product and all parts thereof to the
store where it was originally purchased. If you need to send the
product for service during the warranty period, KIDdesigns will
repair or, at its discretion, replace this product without charge
(except for a $6.00 charge for handling, packing, return
UPS/postage and insurance). This decision is subject to verification
of the defect or malfunction upon delivery of this product to the
Factory Service Center listed below. The product must include
proof of purchase, including date of purchase.
Before returning this product for service, please first replace the
batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Remove batteries (if applicable) and pack unit in a well-padded,
heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card
statement, or other proof of the date of purchase.
3. Enclose a check or money order payable to the order of
KIDdesigns, for the sum of $6.00.
4. Send the unit prepaid to the Factory Service Center listed
below.
NOTE: This warranty is valid only if the product is used for the
purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence, misuse or accident,
or which have been modified or repaired by unauthorized persons;
(ii) cracked or broken cabinets, or units damaged by excessive
heat; (iii) damage to CD’s or tape cassettes (if applicable); (iv) the
cost of shipping this product to the factory service center and its
return to the owner.
This warranty is valid only in the United States of America and
does not extend to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are also
limited to one year, and KIDdesigns will not be liable for
consequential damages. (Some states do not allow limitations on
implied warranties or exclusion of consequential damages, so
these restrictions may not apply to you.) This warranty gives you
specific legal rights, and you may also have other rights which
vary from state to state.
Send unit to:
Consumer Repair Department
KIDdesigns Inc.
1330 Goodyear Dr.
El Paso, Texas 79936-6420
© Disney
Visit disneyprincess.com
.
Manufactured and Distributed by KIDdesigns, Inc.
Rahway, NJ 07065-5024
"Once Upon A Dream" Words and Music by Jack Lawrence and Sammy Fain
© 1952 Walt Disney Music Company (ASCAP) Copyright Renewed. All Rights Reserved.
One Year Limited Warranty
It is important to keep the unit as dry and clean as possible.
Clean the unit with a soft cloth moistened only with mild
soap and water. Stronger cleaning agents, such as thinner
or similar materials are not recommended, as they may
damage the surface of the case.
Do not allow dirt, sand, small particles, water or other
liquids to enter the toy's casing.
If the unit is to be left unused for an extended time period,
such as a month or longer, have an adult remove the
battery to extend its life and to prevent leaking or corrosion.
Maintenance
Printed in China
DP-070-051811-1
���
Battery Installation
���
���
This unit has a demo tab for in-store demonstration purposes.
Make sure to remove this tab (located on the back of the
unit). To do so, gently pull on tab. Dispose of tab properly.
Removing the Demo Tab
