Kidde VM-PMI Instalation Sheet Download Page 2

Page: 2 / 4

2 / 4

P/N 3101788-EN • REV 03 • ISS 16FEB16

Figure 2: Installing the audio mounting bracket and EAEC card

(1) Electronics chassis

(2) Audio mounting bracket

(3) #6-32 × 5/16 screw (4X)

(4) #8-32 K-nut (4X)

Figure 3: Audio user interface connectors

Table 1: Audio user interface connectors
Label

Description

Label

Description

EAEC ribbon cable connector

Telephone cable connector

Audio user interface to audio control board connector

Hook switch card connector

Microphone cable connector

EAEC

(1)

(2)

(3)

(4)

TELEPHONE

MIC

TELEPHONE

MIC

Summary of Contents for VM-PMI

Page 1: ...ble clamp that is affixed to the enclosure and then connect the other cable end to J1 on the EAEC card See Figure 4 6 Loosely secure the cable to the mounting bracket using the nylon cable tie provide...

Page 2: ...K nut 4X Figure 3 Audio user interface connectors Table 1 Audio user interface connectors Label Description Label Description J1 EAEC ribbon cable connector J4 Telephone cable connector J2 Audio user...

Page 3: ...e Figure 5 Wiring the EAEC card 1 Network option card installed 2 Network option card not installed 3 Remote microphone key out 4 Remote microphone audio out 5 Remote microphone shield 6 No connection...

Page 4: ...tivates page to all areas Activates deactivates page to areas not receiving EVAC or Alert message Page To Evac Page To Alert Firefighter Phone Page By Phone Buzzer Silence Activates deactivates page t...