To activate the battery carrier tamper resist feature, remove
the unit from the trim and locate the small cut-out in the
middle of the product label on the back of the unit. With a
small screwdriver, or similar tool, slide the switch towards the
top of the label. (see Figure 6) The tamper resist feature is
now active and the battery carrier can not be opened until
the tamper resist feature is deactivated.
NOTE: Before activating the
battery carrier tamper resist
feature, make sure a fresh
battery is installed in the unit
and that the battery carrier is
properly closed. If the battery
carrier tamper resist feature is
activated while the battery
carrier is open, the battery carrier
will not close and the unit will be inoperable.
FIGURE 6
Operating Instructions
POSTS
FIGURE 5A
FIGURE 5B
16
