background image

Mounting Your Extinguisher

Please follow the instructions below
for mounting the bracket that was 
supplied with your HomeHero

TM

 Kitchen 

Fire Extinguisher.

Drill a hole in your wall and a second 
hole exactly 1-1/4 inches below it. Insert 
a drywall anchor in each hole. If you are 
attaching the bracket to a wooden stud, 
anchors are not needed. Make sure that 
there are at least 12 inches of clearance 
above the top hole and 7 inches of 
clearance below the bottom hole. If there 
is inadequate clearance above or below 
the holes, the fire extinguisher will not fit 
in the designated space.

Assembling and Installing Bracket

1 Install the circular wire component at the 

bottom end of the bracket by squeezing 
the wire prongs so that they fit through 
the only pair of holes at the bottom end 
of the bracket. (Please note: bracket 
may already be assembled.) The long 
wire component should be located at 
the top end of the bracket where two 
pairs of holes are available.

2 Install the long wire component at the 

top end of the bracket where two pairs 
of holes are available. If installing the 
HomeHero

TM

 Kitchen Fire Extinguisher 

alone, align the long wire component 
so that its prongs fit through the 
lower pair of holes. If installing the 
fire extinguisher together with the 
HomeHero

TM

 Fire Extinguisher Docking 

Station*, align the long wire component 
so that its prongs fit through the pair of 
holes at the top end of the bracket.

3 Select the appropriate screws for 

your mounting application (screws 
not included). To avoid scratching 
the extinguisher, flathead screws are 
recommended.

Inserting Docking Station*

(Follow mounting instructions provided 
with docking station.)

Securing Extinguisher in Bracket

Bracket without Docking Station*

Install the fire extinguisher into the 
bracket by placing the rubber foot of the 
extinguisher into the ring at the base of 
the bracket with the gauge and pin facing 
toward you. Push the unit toward the wall 
until the extinguisher is fully seated. The 
extinguisher fits securely into the bracket 
and will require a slight force to be fully 
inserted into the top wire component.

Para Instalar su Extinguidor

Por favor siga las instrucciones abajo 
para instalar el soporte incluído con  su 
extinguidor de incendios para cocinas 
HomeHero

TM

.

Con un taladro, haga un hueco en la 
pared y un segundo hueco exactamente 
1- ¼ pulgada debajo del primero. Inserte 
un ancla en cada hueco. Si va a colocar 
el soporte en un taco de madera, el ancla 
no es necesario. Asegurese de que haya 
por lo menos 12 pulgadas de espacio 
arriba el hueco superior y 7 pulgadas de 
espacio debajo del hueco inferior. Si hay 
una cantidad de espacio inadecuada, el 
extinguidor no cabrá.

Ensamblaje e Instalación del Soporte

1 Instale el componente circular de 

alambre en la parte inferior del soporte 
apretando los dientes de alambre 
de manera que pueda insertarlos en 
el par de huecos de la parte inferior 
del soporte. (Por favor note que el 
soporte puede venir ensamblado.) El 
componente de alambre largo debe 
estar localizado en la parte superior 
del soporte donde los dos pares de 
huecos estan ubicados.

2 Instale el componente de alambre 

largo en la parte superior del soporte 
donde los dos pares de huecos 
estan disponibles.  Si desea instalar 
únicamente el extinguidor para cocinas 
HomeHero

TM

, debe alinear el alambre 

largo de manera que los dientes entren 
en los huecos de la parte inferior.  Si 
va a instalar el extinguidor HomeHero

TM

con la Base*, debe alinear el alambre 
largo de manera que los dientes entre 
el par de huecos superiores.

3 Seleccione los tornillos adecuados 

para la superficie donde va a hacer la 
instalación (tornillos no incluídos)  Para 
evitar rayar el extintor, tornillos con 
cabeza plana son recomendados.

Insertar en la Base*

(Siga las instrucciones de instalación 
proveídas con la base.)

Asegurar el Extinguidor en el 
Soporte sin la Base*

Instale el extinguidor en el soporte 
colocando el pie de goma del extinguidor 
en el anillo en la base del soporte con 
el indicador y sujetador hacia usted.  
Empuje la unidad hacia la pared hasta 
que el extintor este completamente 
asegurado.  El extintor cabe seguramente 
en el soporte y requerirá fuerza leve 
para insertarlo completamente en el 
componente superior de alambre largo.

*La Base serà disponible al comienzo de 2008

*Docking Station will be available early 2008

Pull

Pull Pin.
Hold Unit
Upright.

Aim

Stand Back
Six Feet. 
Aim at 
Base of Fire.

Squeeze
& Sweep

Squeeze
Lever and 
Sweep
Side to Side.

Halar.

Apuntar.

Presionar y
Aplicar.

CUIDADO:

Bajo ciertas condiciones de 

incendio o calor, el polvo de químico seco en 
extinguidores de tipo ABC pueden causar 
daños o ser súmamente difícil de  remover 
de la superficie de los hornos, incluyendo 
los de tipo auto-limpiante. No utilize la 
función de auto-limpieza para remover 
polvo ABC de su horno.  Extinguidotes de 
tipo BC son recomendados para areas de 
cocina.

CUIDADO:

El agente que contiene este 

extinguidor no es tóxico, pero puede 
causar irritación de la piel. Evite la 
inhalación del agente químico seco. En 
caso de contacto, lave el área afectada 
con agua limpia y fresca. Si la irritación 
persiste, inmediatamente contacte a su 
medico y provea el nombre del agente 
químico (vea la etiqueta del extinguidor).

Remember the Phrase PASS

CAUTION:

 Under certain fire and heat 

conditions, the dry chemical powder 
in ABC type extinguishers will cause 
damage or prove extremely difficult to 
remove from oven surfaces, including 
self-cleaning models. Do not use self-
cleaning feature to remove ABC powder. 
BC type extinguishers are recommended 
for cooking areas.

CAUTION:

 The agent contained in 

this extinguisher is not toxic, but may 
cause skin irritation. Avoid inhaling the 
dry chemical agent. In case of contact, 
flush affected area with clean, cool water. 
If irritation persists, contact a physician 
immediately and provide name of 
chemical agent (see extinguisher label).

A la Mano Para su Tranquilidad

TM

Felicidades, ahora usted es el dueño de 
un extinguidor de incendios para cocinas 
HomeHero

TM

.

vea

Coloque este extinguidor elegante 
en el mesón de su cocina o repisa 
para visibilidad a toda hora.

tome

A la mano para acceso rápido

use

Agarradero ergonómico y botón que 
puede pulsar con una sola mano 
para una mayor facilidad de uso.

Tres Productos HomeHero

TM

Una Red Inalámbrica Integrada.

Use el extinguidor HomeHero

TM

 en su Base* 

en conjunto con alarmas HomeHero

TM

de fuego/CO 2-en-1

**

 para crear una red 

inalámbrica de alarmas que le proveerá 
alerta inmediata con claras instrucciones 
verbales.

Cuál Extinguidor Usar

Su nuevo extinguidor de incendios para 
cocinas HomeHero

TM

 es de tipo BC. Hay 

dos tipos communes de extinguidores 
de incendio, ABC y BC. Extinguidores 
ABC combaten fuegos que involucran 
madera, papel y telas asi como tambien 
líquidos inflamables e incendios de tipo 
eléctrico.  Extinguidores BC son utilizados 
típicamente en cocinas ya que el agente 
químico en extinguidores ABC puede dañar 
su horno y otras superficies en su cocina.   
Extinguidores ABC deben ser usados en 
otras habitaciones en su hogar.

Inspección Y Mantenimiento

Para asegurarse que su extinguidor esté 
listo para ser usado cuando lo necesite:

• Lea y siga todas las instrucciones en la 

etiqueta y el manual del usuario.

• Inspeccione el extinguidor 

POR

LO MENOS UNA VEZ AL MES

(más frecuentemente cuando las 
circunstancias lo requieren.

• Verifique que el extinguidor esté 

cargado.  El aguja en el indicador 

DEBE

estar en el area verde.  Si el aguja esta 
en el area roja, el extinguidor ya NO 
está listo para ser usado y

 DEBE SER 

REEMPLAZADO

.

• Inspeccione la boquilla de descarga.   

Asegurese de que esté limpia y libre 
de obstrucciones. Busque cualquier 
abolladura, raya, corrosión o cualquier 
otro daño.

• Asegurese de que el sujetador esté 

firmemente en su sitio.

At Hand for Peace of Mind

TM

Congratulations, you are now the 
owner of a HomeHero

TM

 Kitchen Fire 

Extinguisher.

see

Sits stylishly on kitchen counter or 
shelf for 24/7 visibility 

take

At-hand for rapid accessibility 

use

Ergonomic grip and one-hand push 
button dispensing for easy use

Three HomeHero

TM

   Products.

One Integrated Wireless Network.

Use the HomeHero

TM

 Kitchen Fire 

Extinguisher with its Docking Station* 
and HomeHero

TM

 2-in-1 Smoke/CO 

Alarms** to create a wireless network 
providing immediate alerts with clear, 
verbal instructions.

Which Extinguisher to Use

Your new HomeHero

TM

 Kitchen Fire 

Extinguisher is a type BC extinguisher. 
There are two common types of fire 
extinguishers, ABC and BC. Type ABC 
extinguishers fight wood, paper and cloth 
fires, plus flammable liquid and electrical 
fires. Type BC extinguishers should 
only be used for flammable liquids and 
electrical fires. Type BC extinguishers 
are typically used in kitchens because 
the chemical agent in ABC extinguishers 
may damage ovens and other kitchen 
surfaces. Type ABC extinguishers should 
be used in other rooms of the home.

Inspection and Maintenance

To ensure that your fire extinguisher will 
be ready when needed:

• Read and follow all instructions on the 

label and in the User’s Guide.

• Inspect the extinguisher 

AT LEAST 

ONCE A MONTH

 (more frequently 

when circumstances require).

• Check that the extinguisher is charged. 

Pointer on pressure indicator 

MUST

be in green section. If pointer is in red 
section, extinguisher is 

NOT

 ready for 

use and 

MUST BE REPLACED

.

• Check the discharge nozzle.  Make sure 

it is clean and free of obstructions.

• Keep the extinguisher clean. Check 

for dents, scratches, corrosion or any 
other damage.

• Be sure the pull pin is firmly in place.

Kitchen Fire Extinguisher

P/N 21007244A

*La Base serà disponible al comienzo de 2008

*Docking Station will be available early 2008

**La alarma de humo/CO 2-en-1 estará disponible
   a finales del 2007

**2-in-1 Smoke/CO Alarm will be available late 2007

Six-Year Limited Warranty

KIDDE

®

 will repair or replace this product to the 

original owner free of charge, if defective in material 
or workmanship. This warranty does not apply to 
damage resulting from accident, alteration, abuse or 
failure to follow instructions supplied.

KIDDE

®

, at its option, may refund the purchase 

price in lieu of replacement or repair. ANY AND 
ALL IMPLIED WARRANTIES, INCLUDING ANY 
WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE SHALL BE LIMITED 
TO A PERIOD OF SIX (6) YEARS FROM DATE OF 
PURCHASE. KIDDE

®

, its dealers and distributors 

shall not be responsible or in any way liable for any 
special or consequential damages for breach of any 
warranty or implied warranty.

This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

This fire extinguisher is filled with a dry chemical 
agent. Familiarize yourself with the instruction label 
on the fire extinguisher.

DO NOT  TEST BY PARTIALLY 
DISCHARGING. LOSS OF PRESSURE
WILL OCCUR.

Garantía Limitada de Seis Años

KIDDE

®

 reparará o reemplazará este producto al dueño 

original libre de costo, si resultara defectuoso por 
materiales o manufactura. Esta garantía no aplica a daños 
que resulten por accidents, alteración, abuso, o por no 
seguir las instrucciones incluídas con el producto.

KIDDE

®

 tiene la opción de reembolzar su dinero en lugar 

de reemplazar el producto o repararlo. CUALQUIERA Y 
TODAS LAS GARANTIAS IMPLICITAS, INCLUYENDO 
GARANTIAS DE COMERCIABILIDAD O APTITUD PARA 
UN PROPOSITO PARTICULAR ESTAN LIMITADAS 
A UN PERIODO DE SEIS (6) A OS A PARTIR DE LA 
FECHA DE COMPRA. KIDDE

®

, sus comerciantes 

y distribuidores no serán responsables por daños 
especiales o consecuentes por incumplimiento de 
cualquier garantía o garantía implícita.

Esta garantía le ofrece derechos legales específicos, 
y usted goza tambien de otros derechos que pueden 
varíar de estado a estado.

Este extinguidor de incendio fue llenado con un agente 
de químico seco. Familiarícese con las instrucciones en 
la etiqueta del extintor de incendios.

NO PRUEBE EL EXTINGUIDOR

 

DESCARGANDOLO PARCIALMENTE. 

 

PERDIDA DE PRESION TOTAL OCURRIRA.

Reviews: