Series 35-71, 120 VAC Direct Spark Ignition Control
Page 7
www.fenwalcontrols.com
1-800-FENWAL-1
1
. SILICONE RUBBER SUPRESSION TYPE:
Resistive carbon coated fiberglas core prevents spark energy radiation from interfering with
other electronic systems. Select this wire type for applications where wire lengths are less than 36” and noise is a major concern.
SPECIFICATIONS:
Voltage Rating
Agency Rating
Temperature Rating
Diameter
Jacket Material
25 KVDC
SAE J2031
200°C (392°F)
7mm (.27”)
Silicone Rubber
over Fiberglas Braid
Part Number: 05-129608-0XX
Part Number: 05-129608-2XX
Part Number: 05-129608-6XX
1/4” FEMALE Q.C. WITH SILICONE RUBBER BOOT
RIGHT ANGLE SPARK PLUG
WITH SILICONE RUBBER BOOT
High Voltage Ignition Wire - 3 Types
Part Number: 05-127613-2XX
Part Number: 05-129865-0XX
Part Number: 05-125948-0XX
Part Number: 05-129867-0XX
Delivering the 15K to 25K volts of spark energy from the ignition control to the electrode is a vital element of an ignition system.
There are 3 material options and multiple terminal configurations available. Shown are the most popular versions offered by Fenwal.
To ensure maximum spark energy, it is recommended that the ignition wires not be longer than 36”. Longer lengths are available
and should be evaluated on the appliance to determine if there is sufficient spark energy to consistently light the burner under
all conditions. Once the wire type and terminal configurations are determined, complete the part number by replacing the last two
digits (“XX”) with the length in inches (“L” dimension). Standard wire lengths are 12, 18, 24, 30, 36, 48 and 60 inches.
Example: 05-129608-018 = 18 inches. For other lengths, please contact Fenwal.
1/4” FEMALE Q.C. -
FULLY INSULATED
BOTH ENDS
1/4” FEMALE Q.C.
BOTH ENDS
RIGHT ANGLE SPARK PLUG WITH
SILICONE RUBBER BOOT
1/4” FEMALE Q.C.
TERMINATIONS SAME AS TYPE 1
Part Number: 05-129866-0XX
Part Number: 05-129866-1XX
3/16”FEMALE Q.C.
FULLY INSULATED
1/4”FEMALE Q.C.
FULLY INSULATED
1/4” FEMALE Q.C. FULLY INSULATED
BOTH ENDS
2
. SILICONE RUBBER COPPER CONDUCTOR TYPE:
Low resistance copper conductor transmits maximum spark energy. Select this
type when maximum energy or longer wire lengths are required and noise is not a major concern.
SPECIFICATIONS: Voltage Rating
Agency Rating
Temperature Rating
Diameter
Jacket Material
25 KVDC
UL Type 3257
250
°
C (482
°
F)
7mm (.27”)
Silicone Rubber
3
. TEFLON INSULATED TYPE:
Low resistance copper conductor transmits maximum spark energy. Select this type
for applications that have tight clearances and sharp bend radii.
SPECIFICATIONS:
Voltage Rating
Agency Rating
Temperature Rating
Diameter
Jacket Material
25 KVDC
UL Type 1911
250
°
C (482
°
F)
2mm (.08”)
Teflon
4
. FLAME SENSE WIRES:
Spark electrodes with integral remote sense rod, i.e. 22-100001-076, have a 3/16” male q.c..
Please choose flame sense wire 05-129866-0XX. For remote flame sense rods , i.e. 22-100001-080, choose flame sense
wire part number 05-129866-1XX.
SPECIFICATIONS: Voltage Rating
Agency Rating
Temperature Rating
Diameter
Jacket Material
600 V
UL/CSA Listed
200°C (392°F)
18 gage stranded
PVC
