background image

NOTE: 

Move HearthGate to desired location. 

Sections may need to be adjusted again for 

proper fit.

12

 

Lift locking caps and rotate upper and

lower wall brackets until flush against 

mounting surface and lower bar housing is 

aligned with the upper bracket assembly.  

NOTE:

 Sliding wall bracket assembly is 

adjustable for uneven walls and should be 

installed as low as possible.

13

 

With a pencil, lightly outline brackets on

mounting surface.

14

 

Remove wall plates from brackets by

pressing locking tabs and sliding up.

15

 

Hold one wall plate with arrow facing up

inside pencil outline and install using two 

wood screws.  Repeat for all other wall 

plates. 

NOTE:

 Screws provided are for 

mounting directly into wood. If mounting into 

brick, drywall or other surfaces, use 

appropriate hardware.

16

 

Attach gate to wall plates by aligning

arrows and inserting round tabs into wall 

plates (a). Slide down to lock (b). Tighten bolts 

on sliding wall brackets. Gate should now be 

properly installed.

Installation

U S E R   G U I D E

G3111

Auto Close Heart hGate

12

13

14

15

16

(a)

(b)

Removal

Making an enclosed 

play area

17

 

Slide back the locking button (a) and lift

door to open in either direction (b). Door will 

automatically close and the lock will 

re-engage with an audible “click”.  

NOTE:

 The door section must be placed on a 

level surface for the auto close function to 

work properly, if not, the door will need to be 

manually pushed shut. Test auto close 

function before use.

18

 

Hold Open Feature – By opening the door

to a 90º or greater angle, it will stay open 

until it is pushed closed.

19

 

To remove gate from wall press locking

tab on the lower wall bracket assembly 

sliding it up and off the wall plate (a). 

Repeat the process on the upper wall 

bracket assembly and remove entire gate 

from wall (b). Repeat for other side.

20

 

To make the HearthGate a self standing,

enclosed play area, additional sections will 

need to be purchased. After assembly of all 

sections connect the two ends together. Once 

all sections have been assembled, adjust 

them to make a desired shape.

Operation

U S E R   G U I D E

G3111

Auto Close Heart hGate

(a)

(b)

17

19

20

(a)

(b)

18

90º

If you’re looking for quality home furniture & decoration, visit our website.

Reviews: