Attach the Rear Wheels
wheel cover
Nut
1.
Locate a rear wheel (marked
Rear
with gear-shaped protrusion).
2.
Slide the wheel onto the axle with protrusion facing toward vehicle.
3.
Fit the gear shaped protrusion into the gear box.
4.
Align the two locating pins on the inside of the wheel cover into the
wheel holes, and push the wheel cover into place.
5.
Slide a small washer onto the axle.
6.
Attach nut onto the axle. Using the Nut Wench, tighten snugly until
you can see about two threads on the axle. Do not over tighten.
7.
Align the tabs in the hubcap with the holes in the wheel cover.
Press the hubcap into place.
Note:
Do not use a hammer.
8.
Repeat steps 1-7 to attach the other rear wheel.
8
axle
Wheel is
marked
Rear
with
gear-shaped
protrusion
rear wheel
washer
hubcap
washer
gear box
Summary of Contents for KT1052TR
Page 2: ......
Page 6: ...12V12AH Parts 2 bn bk bl 1 2 3 6 5 5 7 8 4 bm 9 ...
