Hyper Flyer
Charger Dock
Instruction Manual
Transmitter & Antenna
Box Contents
1) Unpack And Set Up
Unwind and fully extend
wire antenna. It should extend
loosely behind plane.
Screw metal antenna into
top of transmitter and extend
fully.
Hyper Flyer
Transmitter
Charger Dock
Unscrew battery cover on rear
of transmitter. Insert one (1)
9 volt battery with correct
polarity (see inside of battery
compartment)
Open compartment door and
extend charger plug as shown.
Congratulations!
You are now ready to fly your
Hyper Flyer!
Please read on to see more
information and basic
flying tips!
Attach charge plug to the top of
plane as shown. Be sure that plane
switch is “off” as shown. The charger dock
light will blink during charging. This will
take 5 minutes. Light will shut off when
charge is complete.
Turn transmitter power switch to “on”.
The red light will illuminate,
indicating that power is “on”.
Remove charge plug from
Hyper Flyer. Turn power
switch at top of plane
to “on”.
Unscrew battery cover on rear
of charging dock. Insert ten (10)
“C” batteries with correct
polarity (see inside of
battery compartment) as shown,
replace cover and secure.
A
B
C
D
E
F
G
Warning: battery MUST
be installed as shown,
with correct polarity.
+ -
