background image

Installation Instructions

These enclosures combine KICKER’s award-winning Comp VR with comput-

er designed and human-fine-tuned enclosures. They offer a level of bass

performance never before thought possible from a commercially available

enclosure. The TC Series enclosures are covered in carpet for protection and

pre-loaded with a CompVR woofer.

KICKER TC enclosures are designed to fit behind the seat of a pickup truck.

They are engineered to provide the

best bass response when firing into

the back of the truck seat.

Plug your subwoofer speaker wires

into the terminals located on the back

of the box; the red connectors are

positive and the black connectors

negative. Hook the other end of these

wires to your subwoofer amplifier in

accordance with its owners’ manual;

note the enclosure is wired internally

to produce a 2 or 4 Ohm load at the

terminals depending on the model.

M

Model

Woofer

Imp.

Power

Top            Bottom           Height           Width

Handling        Depth          Depth 

(Watts)        (In., cm)        (In., cm)          (In., cm)         (In., cm)

TTCV

VR

R1100

C10VR       *2,4          300        44-1/2”,11.43 77-3/4,19.69 

1155”, 38.1

2222”, 55.88

NOTE: 

*The two ohm unit should be used with the KX Series Class D amplifiers KX550.3, KX700.5, KX400.1,

and KX600.1. It is not recommended for use with any KX two or four channel amplifiers. 

The four ohm unit should be used with any KX Series two or four channel amplifier. It is not rec-

ommended for use with any KX Series Class D amplifiers.  

TCVR10

Sealed Enclosure Systems

Specifications

Congratulations! You have just purchased one of the most flexible subwoofers

yet from KICKER. Your CompVR  sub is designed to give you great bass perform-
ance in a wide variety of applications. These installations instructions will help you
get the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!    

Reviews: