SWRA411 - ©2012 Stillwater Designs
9-27-12
Page 5 of 8
Fig. 13
Fig. 14
29.
Set the subwoofer in place and connect the wire harness.
30.
Rotate the rear seat back until it is nearly vertical. While holding the seat back with one hand, slide the
enclosure back until the hooks on the bracket are centered under the anchor points at the bottom of
the seat. Slowly rotate the seat back toward the rear of the vehicle until it locks into place. Fig. 14
31.
Reinstall all previously removed parts in reverse order.
32.
Install supplied fuse in the fuse holder under hood.
33.
Reconnect the negative battery cable. Torque to 5Nm.
