11
SoloX Subwoofers
Moun
ting
ATTENTION!
Follow the pattern, hand
tightening each, then go back
and tighten using the same
pattern.
14. Pop open a cold beverage and admire your work!
12. Insert the SPAIR back into the
BAM.
Be careful not to
damage the voice coil.
The
Locator Pin on the BAM and
Locator Hole in the SPAIR must
line up!
The ARCTIC Cap will help to
center SPAIR as you lower it into
the BAM. When properly aligned
these assemblies slide together
easily.
NOTE:
Make sure the Locator Pin
and Locator Hole are aligned correctly!
13. Using the 10-24 acorn head
bolts secure the SPAIR to the
BAM. Hand tighten the bolts
following the pattern shown in
the diagram to the right (Fig 1)
and then go back using a wrench
or socket to snug them up. This
will insure a proper fit.
Locator Pin
Locator Hole
1
2
3
4
5
6
7
8
Fig 1
