Kicker SOLO-BARIC S10L3 Owner'S Manual Download Page 5

5

VENTED ENCLOSURE APPLICATIONS

These boxes are the enclosure of choice for outrageous street bass and high performance SPL contests. 
If space is not a problem and you want to get the most from your Solo-Baric L3, try one of these ported 
designs. You will not be disappointed. Solo-Baric subwoofers will handle massive amounts of power in 
any of the recommended enclosures, minimum or maximum. The smaller enclosures are best for use in 
limited-space applications. The larger recommended enclosures will yield slightly more bass at the lowest 
frequencies.

The ported Compact design increases bass effi ciency and fi ts in many space-limited applications. 
Although it is the smallest recommended ported enclosure, the output from 30 to 80Hz will be 
considerably higher than that of any sealed box. The ported SQ design has even more output in this 
crucial frequency band, and is the largest and most effi cient enclosure design.

Vented Compact

 

S10L3 S12L3  S15L3

Box Volume, ft³ (L) + port displacement 

1.25 (35.4) 

1.75 (49.6) 

3.0 (85)

Port Opening Size, in x in (cm x cm) 

2 x 10.5” (5.1x26.7) 

2.5 x 12.5” (6.4x31.8) 

2.75 x 15.5” (7x39.4)

Port Length, in (cm) 

20” (50.8) 

20” (50.8) 

25.75” (65.4)

Power Handling, RMS 

300 

300 

500

Vented SQ

 

S10L3 S12L3  S15L3

Box Volume, ft³ (L) + port displacement 

1.75 (49.6) 

2.25 (63.7) 

5 (142)

Port Opening Size, in x in (cm x cm) 

2.5 x 10.5” (6.4x26.7) 

3 x 12.5” (7.6x31.8) 

3 x 15.5” (7.6x39.4)

Port Length, in (cm) 

20” (50.8) 

20.5” (52.1) 

22” (55.9)

Power Handling, RMS 

300 

300 

500

Figure 5

B

A

C

The Solo-Baric generates more sound pressure 
than an equivalently-sized round speaker and 
excels when used in the recommended sealed 
boxes. These sealed enclosure designs give 
the smoothest response with increased energy 
at the lowest frequencies, 20 to 30Hz. These 
designs deliver massive amounts of highly-
accurate bass and can be driven with punishing 
levels of amplifi er power.

The Solo-Baric high performance suspension 
system can operate in a larger sealed 
enclosure. This maximum enclosure volume 
application is ideal for SQ (ultra sound quality) 
installations. The SQ enclosure generates a 
very fl at response curve and superbly extends 
the sub-bass response. 

Solo-Baric woofers perform well in any size sealed enclosure between the Compact and SQ volume 
recommendations. These systems will exhibit benefi ts of both designs:  Compact produces high-impact 
bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the 
recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations 
have been calculated with the airspace inside the enclosure and include the displacement of the woofer. 
All sealed-enclosure airspace should be fi lled to 50% loose poly-fi l (polyester fi berfi ll) stuffi ng. Do not make 
the airspace greater than the SQ, maximum enclosure volume, recommendation.

2011 L3 Multilingual Rev B.indd   5

2011 L3 Multilingual Rev B.indd   5

10/19/2010   2:08:26 PM

10/19/2010   2:08:26 PM

Summary of Contents for SOLO-BARIC S10L3





















Reviews: