3. With the Coil Cap now
removed you can screw the
four binding posts
(clockwise) back into the
SPAIR assembly.
Note:
The
B3 Link
system
offers 3 ways to attach your
speaker wires to the SPAIR;
B
inding post,
B
arrier strip
and terminal
B
lock. If you
are using the terminal block
or barrier strip method to
attach your speaker wires,
use the appropriate
hardware included with your
S18X in place of the binding
posts.
See your S18X
owners manual for more
details.
4. With your binding
posts or other hardware
now attached to the
SPAIR, place it voice coil
side up in a
CLEAN and
SAFE
location to protect it
from damage until you are
ready to put it in the BAM
(Basket And Motor)
assembly.
3
SoloX 18 Subwoofer
UNPACK SPAIR
Unpack SPAIR
1. Once you have
removed the SPAIR from
the cardboard shipping
carton you need to remove
the protective Coil Cap.
The Coil Cap is attached
to the spair with the four
binding posts.
2. Simply unscrew the
four binding posts (counter-
clockwise) and then gently
lift the Coil Cap from the
SPAIR assembly being
careful not to damage the
voice coil.
Locator Pin Hole In SPAIR
Locator Pin Hole In SPAIR
