2
Amplifi er Wire Routing
1. Disconnect the negative battery cable from the battery. (For diesel engines with dual batteries disconnect
both negative cables)
2. Remove cover on the driver’s end of the dash. Fig. 1
3. Remove the bolt securing the parking brake release lever. Some trucks may not have a release lever, but
there is still a bolt in that location which needs to be removed. Fig. 2
4. Remove the two screws securing the panel below the steering column and pull the panel loose. Fig. 2
5. Remove the two screws securing the panel below the radio and pull the panel loose.
Amplifi er Assembly
Amplifi er Power Harness
Amplifi er Body Harness
M6 Bolt
25A Fuse
Wire Ties x6
Fig. 1
Fig. 2
Bolt is
located
here
