4
English
Installation
Wiring
Disconnect the vehicle’s battery to avoid an electrical
short. Connect the KPB’s black ground wire to a
paint-and-corrosion-free, solid, metal area of the
vehicle’s chassis, or to the negative battery terminal.
Connect the KPB’s red power wire to the positive
battery terminal.
Install a 15A fuse for the KPB1
or 30A fuse for the KPB2 between the KPB
and the power source.
The fuse should be within
18” (45cm) of the power source and in-line with the
harness’ red power cable, which is connected to the
KPB. The wiring loom may be removed to assist with
installation, however this is not recommended and will
void the product’s warranty.
12V
LINE-OUT
gray
AUX IN
black
fuse
battery
to chassis ground or battery
IMPORTANT: The KPB draws a small amount
of power over time, even when off. If storing
the vehicle for two weeks or more, take
precautions to ensure the life of your vehicle’s
battery, such as disconnecting the fuse.
≤18”
(45cm)