Kicker KX350.4, Owner'S Manual

Page: 4 / 16

4
KX Amplifiers
Installa
tion
Mounting
When selecting a location to mount your Kicker amplifier be
sure it is structurally sound and that there are no items behind
the area that could be damaged by the screws. Check for brake
lines, fuel lines, gas tanks, or wiring harnesses etc.
All amplifiers generate heat under normal operation. Be sure to
choose a location that allows adequate ventilation for the
amplifier. Also consider that the air temperature inside an
automobiles trunk can reach upwards of 140 degrees fahrenheit.
An amplifier mounted here may require additional cooling tactics
such as fans or venting to allow cool operation. If possible,
mounting the amp in the passenger compartment will allow
cooler operation.
Remove Remove
Remove
Remove
Remember that the controls on top of the amp will need to be
accessible for adjustment later. Keep this in mind as you choose
your amplifier’s mounting location.
Now that you are ready to mount your amplifier, use the
supplied 3mm allen wrench to remove the amplifier EndKap. This
will give you access to the mounting holes in the amplifier and all
wiring connections.
With the EndKap removed, drill 4 holes using a 7/64” drill bit
and use the supplied #8 screws to mount the amplifier.