background image

17

English

Warranty

When purchased from an Authorized KICKER Dealer, KICKER 
warrants this product to be free from defects in material and 
workmanship under normal use for a period of TWO (2) YEARS from 
date of original purchase with receipt. If this product is identified as 
“Refurbished” or “B Goods”, the warranty is limited to a period of 
THREE (3) MONTHS from the date of original purchase. In all cases 
you must have the original receipt. Should service be necessary 
under this warranty for any reason due to manufacturing defect 
or malfunction during the warranty period, KICKER will repair or 
replace (at its discretion) the defective merchandise with equivalent 
merchandise. Warranty replacements may have cosmetic scratches 
and blemishes. Discontinued products may be replaced with more 
current equivalent products. This warranty is valid only for the original 
purchaser and is not extended to owners of the product subsequent 
to the original purchaser. Any applicable implied warranties are limited 
in duration to a period of the express warranty as provided herein 
beginning with the date of the original purchase at retail, and no 
warranties, whether express or implied, shall apply to this product 
thereafter. Some states do not allow limitations on implied warranties; 
therefore, these exclusions may not apply to you. This warranty gives 
you specific legal rights; however you may have other rights that vary 
from state to state.

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE:

Defective merchandise should be returned to your local Authorized 
Stillwater Designs (KICKER) Dealer for warranty service. Assistance 
in locating an Authorized Dealer can be found at www.KICKER.com 
or by contacting Stillwater Designs directly. You can confirm that 
a dealer is authorized by asking to see a current authorized dealer 
window decal.

If it becomes necessary for you to return defective merchandise 
directly to Stillwater Designs (KICKER), call the KICKER Customer 
Service Department at (405) 624-8510 for a Return Merchandise 
Authorization (RMA) number. Package only the defective items in a 
package that will prevent shipping damage, and return to:

Stillwater Designs

3100 North Husband St

Stillwater, OK 74075

Summary of Contents for KSS50



















Reviews: