7
Troubleshooting
KPw2 is unresponsive or will not power on:
1.
Check that the battery is fully charged by connecting the KPw2 to a known-good power source. Allow the
KPw2 to charge for at least 3.5 hours, then power on the speaker. The battery is full when the
battery status
LED
turns solid RED while charging.
2.
Reset the KPw2 by pressing and holding the
power button
while inserting the USB charging cable. The
USB cable needs to be connected to a known-good power source.
KPw2 will not pair or connect:
1.
If you have previously paired your device with the KPw2, then please ‘Unpair’ or ‘Forget this Device’ per the
instructions for your audio device.
2.
Press and hold the
Bluetooth|Phone button
for 2 seconds to enter pairing mode. Make sure your audio
device is scanning or in ‘discovery mode’, then select Kicker KPw2.
Device paired and connected, but volume is low or inaudible:
Check the audio levels of both devices.
WARNING!
Keep out of reach of children. The content of this package includes small parts and cords that can cause choking
or strangulation.
WARRANTY
KICKER products are warranted against defects. Duration and terms of warranty depend on the laws in the
country in which it was purchased. For details see your local KICKER Dealer or
www.kicker.com/warranty
.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law
. You
are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
