Kicker KMTES8, Owner'S Manual

Page: 3 / 16

3
attach wiring to outer speaker terminals
stainless steel socket-head cap
screws (1/4” Allen wrench)
lower mounting bracket
(set desired angle before
completing mounting)
upper mounting bracket
upper gasket
lower gasket
LED wire port
ABS mounting inserts
remove inner screws from back of
enclosure to orient back plate.
mount speaker to enclosure
(recommend M4 or #8 screws)
attach soldered wiring from inner
terminals to speaker terminals,
keeping in mind the polarity of each.
loosely fi ll the enclosure with poly-fi l, the
white protective layer in the packaging.
The KMTES will use one sheet for a
woofer and one-half sheet for a horn.