Kicker KMC45, Owner'S Manual, Page: 3 / 8

3
KMC45
Installation Overview
Main Harness
1- Red, Switched 12V+
2- White/Blk, Left Front Spkr, Negative
3- White, Left Front Spkr, Positive
4- Orange, Dimmer
5- Grey/Blk, Right Front Spkr, Negative
6- Grey, Right Front Spkr, Positive
7- Blue, Amp Turn-on
8- Green/Blk, Left Rear Spkr, Negative
9- Green, Left Rear Spkr, Positive
10- Black, Ground
11- Purple/Blk, Right Rear Spkr, Negative
12- Purple, Right Rear Spkr, Positive
1. Main Harness
2. USB Port
3. Antenna Input
4. Remote Port
5. AUX Input
6. Rear RCA Output
3” Hole Cutout
1
2
3
4
5
6
5.5”
3.5”
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide more reasonable protection against harmful interference
in a residential installation.
Operation is subjected to the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) the device must accept any interference received, including interference that may cause
undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con
-
nected.
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
The equipment should be installed and operated with minimum distance 20cm between the radiator
& your body.
CE
Operation temperature: (-25°C~55°C )
Bluetooth: 2402-2480MHz
Bluetooth transmitter power: 4.33dBm
Hereby declares that this equipment is in compliance with essential requirements and other relevant
provisions of Directive 2014/53/EU.
All radio frequencies can be used in all EU member safe without restrictions.
IC WARNING
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the follow -
ing two conditions: (1) This device may not cause interference; and (2) This device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio ex -
empts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.