11
TWEEQ will scan and identify all
connected amplifi ers. KICKER has
support for multi-amp installations
using the IQI accessory. You may also
use a USB hub to connect multiple
amps, however technical support is not
available for this setup.
Choose to bridge the channels if both
channels are used to drive a common
load.
Turn the FADER ON if you are running
two sets of inputs to the amplifi er. Turn
the FADER OFF if you want to drive all
channels from a single stereo input.
For example, turn the FADER ON if you
are only using AMP 1 as your input
source. Select the input source for the
subwoofer signal, if applicable.
2015 IQ Quick Start Rev C.indd 11
2015 IQ Quick Start Rev C.indd 11
12/4/2014 1:29:54 PM
12/4/2014 1:29:54 PM
