Wiring
There are three sets of wires supplied with the Kicker Impulse Component Systems. One
set has two different size female connectors (.205" and .110") and is designed to plug on to
the terminals of the woofer. The other end of this wire goes to the woofer output on the
supplied crossover. Also supplied are two sets of wires with no connectors on either end.
One will go from the tweeter output on the crossover to the short wire coming out of the
tweeter; join using the supplied butt connectors. The last set of wires is used to join the
input of the crossover to the output of your source unit.
Coaxial Tweeter Mounting for I5.2, I6.1 and I6.2
Exploded Parts Diagram (I5.2, I6.1, I6.2)
1. Pick the best location for mounting the speaker (see Mounting).
2. If necessary, cut an appropriate size hole for the woofer.
–
–
–
+
+
+
Woofer
Tweeter
Butt
Connectors
Impulse
Crossover
+
–
Source
Other
Channel
4
