manualshive.com logo in svg

Kicker CompVR, Technical Manual

Share
Download
Kicker CompVR Technical Manual Download Page 5

Thank you for your support of KICKER products. Once you have had a chance to see and experience the capabili-

ties of the new KICKER CompVR subwoofers, we believe that you will be as excited as we are about these speakers!
The CompVRs truly set a new standard for bass performance.

This latest revision of our KICKER CompVR Subwoofers Recommended Applications/Enclosures Technical Update

brings together all of our Kicker CompVR woofers into one manual.

The enclosure recommendations in this paper supercede any other previously published recommendations.
Especially when used in sealed enclosures, the new KICKER CompVR will achieve maximum bass performance

after they have been broken in.

Approximately one to two weeks of daily playing will allow the suspension to soften, and reach its optimum equi-

librium. This time period may vary depending on the amount of play time, volume level, and type of music you lis-
ten to. More play time, with medium volume levels and more bass content, will break in the subwoofer most
quickly. The broken-in sub will exhibit stronger bass performance, smoother response, and greater low bass exten-
sion.

For those of you with more sophisticated audio equipment, the CompVR woofers can be broken-in on the test

bench overnight with the following procedure.

KICKER CompVR Freeair Break-in Procedure
1. Connect the speaker to a power amp of about fifty watts or more. The speaker should not be mounted in any
enclosure - just freeair. 

Please make sure it will not walk off the bench while it is playing!

2. Connect an audio generator to the input of the power amp, and adjust the generator to approximately 39Hz for
the C8

VR

, 31 Hz for the C10

VR

, 25 Hz for the C12

VR

, 20 Hz for the C15

VR

, and 17 Hz for the C18

VR

.

3. Now adjust the gain on the amplifier and generator so that the cone is moving to Xmax. This can be determined
visually by looking at the “blur depth” of the logo on the ISD. A close approximation will do. On the C8

VR

this will be

about 3/4”, on the C10

VR

about 7/8”, on the C12

VR

about 7/8”, on the C15

VR

about 1”, and on the C18

VR

about 1”.

NOTE: Keep in mind that as the speaker is used under normal conditions the break-in will continue, so if you don’t
have time for the complete break-in period the speaker will still break-in itself under normal usage.

Kicker CompVR Subwoofers

Recommended Applications 

Page  5

Summary of Contents for CompVR





































Reviews:

No comments

Brands by name

Popular brands

Load more brands