Kicker BassStation PHD12, Owner'S Manual

Page: 2 / 28

2
BassStation™
POWERED SUBWOOFER
ENCLOSURE Owner’s Manual
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Carefully
check the areas where the mounting straps will be placed. Make sure the mounting screws will not puncture
the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the mounting surface.
Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the
enclosure in the climate-controlled passenger compartment.
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Model: PT8 PT10 PH12 PHD12
Subwoofer | inches [cm] 8 [20] 10 [25] 12 [30] 2x 12 [30]
RMS Power @ 14.4V [10% THD] 100W 100W 100W 200W
RMS Power @14.4V [

1% THD] 90W 90W 90W 160W
Net Weight | lbs. [kg] 13.8 [6.2] 18 [8.2] 25 [11.3] 43.2 [19.5]
Height | inches [mm] 11-1/4 [285] 12-13/16 [325] 14-15/16 [380] 14-15/16 [380]
Width | inches [mm] 16-15/16 [430] 19-5/16 [490] 16-13/16 [427] 31-1/2 [800]
Depth at top | inches [mm] 4 [102] 4-11/16 [118] 7-11/16 [195] 7-11/16 [195]
Depth at base | inches [mm] 6-5/8 [168] 7-11/16 [195] 11-1/4 [285] 11-1/4 [285]
All Models:
Frequency Response ± 1dB 25–120Hz
Signal-to-Noise Ratio >95dB
Crossover variable 50–120Hz, 12dB/octave lowpass
Subsonic Filter 24dB/octave @ 25Hz
Phase Switch 0° / 180°
Input Sensitivity low level: 125mV–5V
high level: 250mV–10V
KickEQ Bass Boost variable to +6dB @ 40Hz
Remote Bass included
Enclosure Type sealed
MODEL: PT8 / PT10 / PH12 / PHD12
The space-saving KICKER BassStation™ Powered Enclosures offer the quickest and easiest way to add a
subwoofer to your vehicle. These systems have been meticulously fi ne-tuned by KICKER engineers to deliver
astounding performance and sound without the time-consuming setup required for a typical amp-sub upgrade.
2011 PH-PT RevI.indd 2 2011 PH-PT RevI.indd 2 1/11/2011 9:18:16 AM 1/11/2011 9:18:16 AM