2
BassStation™
POWERED SUBWOOFER
ENCLOSURE Owner’s Manual
INSTALLATION
Mounting:
Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Carefully
check the areas where the mounting straps will be placed. Make sure the mounting screws will not puncture
the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the mounting surface.
Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the
enclosure in the climate-controlled passenger compartment.
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Model:
PT250
Subwoofer | inches [cm]
10 [25]
RMS Power @ 14.4V [10% THD]
100W
RMS Power @14.4V [
1% THD]
90W
Net Weight | lbs. [kg]
18 [8.2]
Height | inches [mm]
12-13/16 [325]
Width | inches [mm]
19-5/16 [490]
Depth at top | inches [mm]
4-11/16 [118]
Depth at base | inches [mm]
7-11/16 [195]
Frequency Response ± 1dB
25–120Hz
Signal-to-Noise Ratio
>95dB
Crossover
variable 50–120Hz, 12dB/octave lowpass
Subsonic Filter
24dB/octave @ 25Hz
Phase Switch
0° / 180°
Input Sensitivity
low level: 125mV–5V
high level: 250mV–10V
KickEQ Bass Boost
variable to +6dB @ 40Hz
Remote Bass
included
Enclosure Type
sealed
MODEL:
PT250
Your space-saving KICKER BassStation™ Powered Enclosure offer the quickest and easiest way to add a
subwoofer to your vehicle. This system has been meticulously fi ne-tuned by KICKER engineers to deliver
astounding performance and sound without the time-consuming setup required for a typical amp-sub upgrade.
2013 PT250 Rev B.indd 2
2013 PT250 Rev B.indd 2
3/19/2013 3:07:36 PM
3/19/2013 3:07:36 PM
