EOP2021-CS9 REV-A.3
48KSS269 Installation Guide
Page
3
of
13
Kicker 48KSS269 system packs pair the Kicker KSC270 mid-range tweeter with a 6”x9”
mid-bass woofer for replacement of factory speakers. The KSC270 utilizes a choice of three
different mounting flanges allowing for bolt-in replacement for some GM, Chrysler, Subaru,
Toyota, and Jeep models. This document demonstrates mounting and wiring of the KSS270 mid-
range tweeter and 6”x9” mid-bass woofer for the following Kicker models:
•
49KSS269
ASSEMBLING AND MOUNTING THE KSC270
1.
Find flange that matches your vehicle’s factory tweeter flange.
2.
Place a “BB” sized piece of black adhesive in the general location shown on the flange.
(Black adhesive is not necessary for installation. Adhesive aids in holding the assembly
together during installation.)
3.
Route KCS270 wires and motor through the flange.
NOTE:
Place flange over terminals
first, then locate speaker in flange.