Kicker 46KMC2, Owner'S Manual

Page: 6 / 32

5
Model KMC2
Power Output @ 14.4V, 4Ω stereo, <10% THD+N 25W x 4
Frequency Response [Hz] 20 – 20k
Signal-to-Noise Ratio [dB] 95
Input Sensitivity 500mV
USB Playback MP3
USB Charging DC 5V, 1A
USB Compatible File System FAT32
Line-Out Level [V] 4
Outer Trim Ring Diameter [in, cm] 4-1/2, 11.3
Protrusion From Mounting Surface [in, cm] 1-1/8, 2.75
Total Mounting Depth [in, cm] 4, 10.1
Mounting Panel Thickness Range [in, cm] 1/4-2, .6-5
Be careful not to drill into wiring or vehicle mechanisms.
You are solely responsible for securely mounting the KMC2
Media Center. See page 2–3 for mounting hole cutout
template.
Before installation, you may wish to plan your placement
of the USB and Auxiliary inputs, and the optional PXiRCX
remote (sold separately), for both convenience and looks!
With a KICKER KXM amplifi er, a pair of KICKER KM
speakers, and a few KICKER cables, you’re looking at a full
system upgrade that will dominate! KICKER amplifi ers and
accessories make upgrading a snap. Ask your dealer about
KICKER amplifi ers and speaker upgrades to complete your
system!
All specifi cations and performance fi gures are subject
to change. Please visit
www.kicker.com for the most
current information.
WARNING: KICKER products are capable of producing sound levels
that can permanently damage your hearing! Turning up a system to a level
that has audible distortion is more damaging to your ears than listening to
an undistorted system at the same volume level. The threshold of pain is
always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling
volume.
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
SPECIFICATIONS