9
9
KICKBIKE WORLDWIDE OY
Mikkolantie 1 A
FI – 00640 HELSINKI
Tel. +358 (0)9 388 3013
www.kickbike.fi
Assembly
Assembly
Your Kickbike is delivered by mail fully functional and inspected. The handlebar
stem, front wheel and the basket of Kickbike City Cruiser have been dismounted.
Basic tools needed for assembly and maintenance are included.
1. Attach the Controls
Push the stem to its location (see cover) and check that brake cables have not
rotated around the handle bar or each another. Tighten the bolt at the upper end
of the stem with a 6 mm Allen key. Note that there may be a plastic cover on top
of the bolt.
2. Mount the Wheels
Place the wheel on the fork. Turn the adjustment nut on the axis almost tight and
close the quick release lever. See section "Wheels" for details.
If the wheel does not fit in its place because the brake pads are too close, then let
some air pressure out of the tyre. You can open the V-brakes of Kickbike Sports
Classic (model 1999) while mounting the wheel.
3. Fill the Tyres
It is essential that you fill both tyres to the specified pressure. See section "Tyres"
for details.
4. Check
Is the handlebar sturdily mounted? Are the brakes functioning? The brake
adjustments may have altered during transportation. See section "Brakes" for
details.
