There are error codes that may be displayed. These will be displayed in the
following way:
FAULT CODES
If all battery type selection lights are flashing simultaneously please see
troubleshooting guide below.
MODE
BATTERY TYPE
WET
GEL
AGM
CALCIUM
LITHIUM
Stage LED
Solar input
high voltage
Solar input
reverse
Alternator
high voltage
Alternator
input reverse
Output
fault mode
S1
LED
Cause
Remedy
Over voltage is detected
at solar input
Solar input is reversely
connected
Overvoltage is detected
at alternator input
Alternator input is
reversely connected
Output battery is
reversely connected
Overvoltage is detected
at output
Output open circuit
or dead battery
Check solar panel
open circuit voltage
Check solar input
connection
Check vehicle
battery voltage
Check alternator
input connection
Check output
cable connection
Check auxiliary
battery voltage
Check auxiliary battery
voltage & cable connections
S2
LED
S3
LED
S4
LED
Recovery Mode Indicator:
When the lithium battery has entered recovery mode, the KickAss DCDC MPPT Solar
Battery Charger display will have the source indicator illuminated (eg; SOLAR) and the
battery type LITHIUM will be flashing. See diagram below.
When the battery voltage has been recovered, the DCDC charger will automatically
change to normal stage charging programs and loads may be reconnected.
1
2
3
4
MODE
BATTERY TYPE
WET
GEL
AGM
CALCIUM
LITHIUM
BULK
ABSORPTION
FLOAT
PULSE
SOLAR
ALTERNATOR
CHARGING
12V 25A DC 4-STAGE
Source will
Illuminate solid
