12/24V
~100-240V
MAIN POWER PANEL
ACCESSORY SOCKET PANEL
AC 240V
SOCKET AC
DC 12/24V
ANDERSON
CONNECTOR
12V/24V ACCESSORIES/
CIGARETTE SOCKET 15A
DUAL USB
SOCKET 2A
The front accessory panel comes with a cigarette socket and
2 usb sockets. This will only work if the DC 12/24V Anderson
Connector on the side is attached to a power source.
The output of these sockets are dependant on the power supply
attached to the DC 12/24V Anderson Connector on the side. If it’s
connected to a 12V source, the output is 12V, if its connected to a
24V source, the output will be 24V.
WARNING * If it is connected to a 24V source, ensure that all
12V devices are disconnected that are not rated for 24V.
OVERRIDE
SWITCH
MAKE SURE YOU DON'T HAVE ANY OBSTRUCTIONS
NEAR THE FRIDGE VENT HOLES TO AVOID OVER
HEATING. ABOUT A MINIMUM OF 5 INCHES OF
CLEARANCE IS NEEDED.
TOP VIEW
TOP VIEW
FRONT
BACK
For emergency purposes (faulty operation or control panel not working
properly) there’s an override switch users can use. To access the override
switch you need to remove the cover, the override switch is not visible or
accessible until the cover is removed. You can flick the override switch to
bypass the control panel and force the fridge to cool up and freeze what
you have in the fridge. This will however only freeze the zone of the fridge
that is currently turned on before flicking the override switch.
NOTE: If the override switch is turned on, the control panel will show
the temperature and voltage but you will not be able to set them
DRAINAGE BUNG
OVERRIDE SWITCH
OFF ON
8
