Kichler Lighting Ceiling fan Instruction Manual Download Page 2

1

1. SAFETY RULES

WARNING! 

RISK OF ELECTRIC SHOCK

All electrical connections must be made in 

accordance with local codes, ordinances, or 
national codes. If you are unfamiliar with 
installing electrical wiring, secure the services 
of a qualified electrician. Before starting this 
installation, disconnect the power by turning 
off the circuit breaker at your main panel or 
removing the fuse at the fuse block. Turning 
the power off using the ceiling fan switch 
(speed control on/off) is not sufficient to 
prevent electrical shock.

NOTE:

 The important safeguards and 

instructions appearing in this manual are not 
meant to cover all possible conditions and 
situations that may occur. It must be 
understood that common sense, caution and 
care are factors which cannot be built into any 
product. These factors must be supplied by the 
person (s) caring for and operating the unit.

"CAUTION-RISK OF FIRE" 
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE 

CORRECT BRANCH CIRCUIT CONDUCTOR.

2. PACKAGE CONTENTS

Unpack your fan and check the contents. You 
should have the following items:

a.    Light fixture
b.    Glass shade
c.    1C, 22W lamp

d.    Part bag contents:

Nut
Spring washer
Pull chains and fobs (2)
wire nuts (2)

a

c

d

b

Summary of Contents for Ceiling fan

Page 1: ...7711 East Pleasant Valley Road P O Box 318010 Cleveland Ohio 44131 8010 Customer Service 866 558 5706 8 30 AM to 5 00 PM EST Monday Friday Instruction Manual Universal Ceiling Fan Light Fixture A Kichler Select light fixture ...

Page 2: ...ient to prevent electrical shock NOTE The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur It must be understood that common sense caution and care are factors which cannot be built into any product These factors must be supplied by the person s caring for and operating the unit CAUTION RISK OF FIRE CONSULT ...

Page 3: ...e the light kit is secure to prevent movement after installation Fig 1 2 Locate the white and blue wires inside the switch housing labeled FOR LIGHT 3 Attach the wires from the light kit to the wires inside the switch housing by pushing the polarized connections together White wire to White wire Black wire to Black wire 4 Raise and hold the light kit assembly close to the mounting plate of the cei...

Page 4: ...ck washer and metal nut rubber side touching the shade Fig 3 3 Now slip the beaded pull chain from the light kit sterm into the hole of the decorative glass cap and place the cap onto the light kit stem Feed the beaded pull chain from the light kit stem through the hole in the decorative nut and thread the decorative nut on securely DO NOT OVER TIGHTEN 4 Slip the beaded pull chain from switch hous...

Reviews: