Fig. 11
Fig. 12
4. Loosen the two set screws in the motor
coupling until the inside channel is clear of
the screws. Remove the Safety Pin and
Locking Clip in the top of the motor
coupling. (Fig. 11)
5. Carefully feed the fan lead wires up
through the downrod. Thread the downrod
into the motor coupling until the Safety Pin
holes are aligned. (Fig. 11)
Next, replace the Safety Pin and secure
with the Locking Clip. Securely tighten
both set screws. (Fig. 11)
6. Slip the coupling cover, mounting screw
cover and canopy onto the downrod in the
order shown. (Fig. 12)
7. Thread the Slope Adaptor Hanger Ball
onto the downrod until the Safety Pin
center hole on the Ball aligns with the
safety pin hole in the downrod. Insert the
safety pin (careful not to damage the lead
wires.) (Fig. 12)
5
Slope adaptor
hanger ball
Safety Pin
Downrod
Canopy
Mounting screw
cover
Coupling cover
Supply wires
Downrod
Safety pin
Lock pin
Set screws
Coupling
Set screws