For best appearance be sure to weave the
electrical cable through chain.
4
3
5
ASSEMBLY INSTRUCTIONS
3. Connect the canopy loops (C) to the fixture
loops (F) using chain (D).
2. To open chain links:
Locate the split in the chain link (D). Put one pair of
pliers (not included) on each side of the split and
rotate the pliers in opposite directions to open the
link's split. The open link should be shaped like the
letter "C".
Do not twist the ends of the link sideways so that
the open link cannot lay flat.
2a
D
D
2b
CORRECT
INCORRECT
NOTE:
The electrical cable will need to get pulled
through the individual parts as they are installed
on this and later steps.
1
G
H
F
CAUTION:
To avoid damage from falling, make
sure the open chain links are fully closed once
assembled.
NOTE:
Add or remove chain links once desired
length is established.
1. Screw threaded pipe (G) into coupling (H). Next,
screw fixture loop (F) into threaded pipe (G).
Repeat.
3
C
D
F
