ASSEMBLY INSTRUCTIONS
12
11.Connect wires from the motor assembly (B) to the light kit (G). Remove 2 screws and loosen the
other 2 screws from the metal shade (F). Position keyhole slots from the light kit (G) around the
remaining screws and twist clockwise. Align the round holes found on the light kit (G) with the
screw holes found on the metal shade (F). Install the two screws that were previously removed
into the round holes. Tighten all screws.
Note:
White wire connects to white wire and black wire connects to black wire.
12. Insert 23-watt max fluorescent bulb (H) into the
socket found on the light kit (G). When necessary,
replace with bulb of the same wattage.
G
H
12
B
G
11