10
B. Common rinse (rinse in the wash tub)
1.
To save time, water and energy, can do pre-spinning before rinsing.
2.
Put laundries which have already been dehydrated into the wash tub.
3.
After filling water to the desired level, turn off the water tap to save water.
4.
Turn the “Wash selector” knob to the "Normal” or “Heavy”.
5.
Set the “wash timer” to the desired time (about 3-5 minutes)for rinsing.
6.
After rinsing, put the washing materials into the spin tub to spin for 1 to 5 minutes.
7.
Drain out the rinsing water in the wash tub.
8.
The above steps can be repeated.
Spinning Method
Efficiency Program
(For efficiency program only)
“Heavy” wash, 15 minutes with 40°C. warm water, spin twice, 3 minutes each; Rinse once for 5 minutes
with 20°C. cold water, spin twice, 3 minutes each; Rinse once for 5 minutes with 20°C. cold water, spin
twice, 4 minutes each Water level “H” used for all wash and rinse.
1.
Shake out the laundry and put them into
the spin tub.
2.
Put the inner spin cover on.
Confirm the inner spin cover is placed horizontally.
Inner
spin cover
Spin tub
Incorrect
Correct
3.
Close the safety cover and the spin cover.
4.
Refer to the following table to select spinning time.
Spin cover
Safety cover
Washing materials
Spin time
Silk
About 50
seconds
Light clothes
(fiber/blended)
About 1
minute
Knitwear (fiber)
About 1
〜
2
minutes
Underwear
(cotton)
About 2
〜
3
minutes
Slipover
(cotton/linen)
About 3
〜
4
minutes
Toweling coverlet
(cotton)
About 5
minutes
