EXTERNAL DEVICE CHARGING
To charge an external device, use the USB/micro USB cable
included in the set. Charging starts automatically and lasts until
the external device is fully charged or until energy in a power bank
is depleted. Disconnect the device when it is fully charged.
SAFETY
- Read and keep this instruction manual.
- Do not attempt to disassemble and do not take off the casing
of the device. Any repairs should be carried out by authorised
service centre.
- Use only original accessories supplied by the manufacturer.
- The device should not be directly exposed to sunlight and other
heat sources.
- Ensure the device does not come into contact with water, damp
or steam to avoid electrocution.
INSTRUCTIONS
All materials from the waste device may be recovered in the form
of new materials or energy. Recycle packaging and instruction
manuals in line with your local recycling plan.
This symbol indicates that the device may not be disposed
together with normal household waste.
The device complies with the RoHS Directive which provides
for restrictions on the stage of production on introducing
hazardous substances to electronics.
The device and accessories comply with directives
concerning safety, health protection and environmental
protection referred by the declaration of conformity.
2nd class device in which reinforced insulation was used,
ensuring protection both against direct and indirect
contact. Because of using reinforced insulation, it is
not necessary to connect the casing of the device to a
protective grounding cable.
Separate collection allows to effectively segregate waste
and recycle it for reuse.
When unpacking the product, divide waste into cardboard and
blisters, remembering about waste sorting.
The product is intended for use in a residential, commercial and
light industrial environment.
By disposing this type of waste in appropriate places, you contribute
to protection of natural resources.
Importer/manufacturer shall not be liable for losses and/or
personal injuries caused by incorrect handling or use by user.
INSTRUCTION MANUAL
PRODUCT COMPONENT INTRODUCTION
1. 2.0 USB Input
2. Micro USB Output
3. Output 5V / 1A
4. USB Input
5. LED light
6. Output 5V / 2.1A
7. Powerswitch
BATTERY CHARGING
To charge the device, use a USB/micro USB cable. Connect the
cable from the side of a USB port into a power outlet with the
maximum voltage up to 5 V DC. A charger with a micro USB port
or a USB port in a turned on PC may be a power supply. Connect
the cable from the side of micro USB port to the micro USB port in
the device IN 5V. LED is on when the device is charging. Disconnect
the device from a power supply when it is fully charged.
LED small lighter using method: Double press the power button
and turns on. Repeat the action in turns down. it can continuously
light on as long as 380 hours at full of power status.
Power is left with the power bank, as below sheet:
Power
indicator
One
light on
Two
light on
Three
light on
Four
light on
SLIM 10.000
<25%
25 - 50%
50 - 75%
75 - 100%
Manual_PL-EN.indd 2
2015-12-14 12:40:16
