manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 455

133

6

6

Driving your vehicle

Smart Cruise Control (SCC)

[1]: Front view camera, [2]: Front radar

The front view camera and front 
radar are used as a detecting sensor 
to detect front vehicles. 

Refer to the picture above for the 
detailed location of the detecting 
sensor.

CAUTION

Always keep the front view camera 
and front radar in good condition to 
maintain optimal performance of 
Smart Cruise Control.
For more details on the precautions 
of the front view camera and front 
radar, refer to "Forward Collision-
Avoidance Assist (FCA) (Sensor 
fusion) (if equipped)" on page 6-83.

Function settings

Setting

To turn on the function

䳜 Press the Driving Assist button to 

turn on the function. The speed 
will be set to the current speed on 
the cluster.

䳜 If there is no vehicle in front of 

you, the set speed will be main

-

tained, but if there is a vehicle in 
front of you, the speed may 
decrease to maintain the distance 
to the vehicle ahead. If the vehicle 
ahead accelerates, your vehicle 
will travel at a steady cruising 
speed after accelerating to the 
set speed.

NOTICE

䳜 If your vehicle speed is between 

0~30 km/h (0~20 mph) when you 
press the Driving Assist button, 
the Smart Cruise Control speed 
will be set to 30 km/h (20 mph).

OBD051014

OBD051369

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands